Page 438 - Hartac Flip Catalogue 2014

Material No. Material Colour Temp. Range Properties & Applications
Polyimide film with permanent acrylic adhesive. Withstands the various processes, fluxes and
B-426 Polyimide Amber -40°C to 270°C cleaning solvents encountered in the manufacturing of printed circuit boards. Withstands
extremely high temperatures.
B-427 Vinyl White /Transparent -70°C to 70°C Permanent acrylic adhesive and a topcoat specifically formulated for thermal transfer printing.
Excellent water, oil and solvent resistance. Self-laminating wire & cable identification.
B-428 Metallised Polyester Silver -40°C to 120°C Metallised polyester with a permanent acrylic adhesive. Designed for rating of serial plates,
product information, warranty labels and inventory control labels.
B-429 Polyolefin White -40°C to 80°C Permanent rubber pressure sensitive adhesive. Good water, oil and solvent resistance. Designed
to fracture easily to prevent one-piece removal.
Permanent acrylic-based adhesive. Designed for rating and serial plates using alphanumerics,
B-430 Polyester Clear -40°C to 100°C barcodes, graphic symbols and logos that require name plate quality. Withstands numerous
solvents and can be applied to variable surfaces.
B-432 Polyester Clear -40°C to 100°C Glossy clear film with permanent acrylic-based adhesive. Designed for rough surfaces and
applications where increased adhesion is required.
B-433 Polyester White -40°C to 120°C Designed for electronic component marking and general purpose applications requiring good
solvent & heat resistance and a label that can be easily removed.
Silver
-40°C to 90°C
B-434 Metallised Polyester Amber. 5 min. at -40°C to 145°C Glossy metallised polyester with permanent acrylic-based adhesive. Designed for rough surfaces
and applications where increased adhesion is required.
DIy Labelmaking B-437 Metallised Polyester White, Green, Black -65°C to 135°C temperature exposure.
High-performance material designed to withstand numerous solvents while maintaining
-40°C to 90°C
Silver
Metallised Polyester
B-435
excellent image quality. Ideal for rating plate applications and general purpose labelling.
Removable silicone pressure sensitive adhesive designed to remove completely after high-
B-436
Polyimide
300°C
Polyvinylfluoride film with permanent acrylic adhesive. Designed for cable and wire bundle
Tedlar®
identification, aero space and military cable marking and applications where self-extinguishing
White or Yellow
properties are required.
Matt metallised polyester, permanent adhesive. Designed for rating and serial plates requiring
both high-performance and protection against removal. Leaves a checkerboard footprint if
B-438
Silver
-40°C to 40°C
removed.
Silver, Gold, Yellow
Designed for use with thermal transfer printers in ambient conditions with limited solvent
Red, Purple,
B-439
-70°C to 40°C
Coloured Vinyl
exposure. Ideal for applications requiring various colours: rating plates or finished product or
Orange Light Blue,
general purpose identification.
B-442
printed legend with protective tamper resistant laminate for indoor and outdoor use. 3-5 years
average expected outdoor life.
Surface printed sign material. Bends easily when heated and can be shaped into projecting signs,
White
B-455 Metallised Film Various -40°C to 145°C Tamper Evident Duraguard® property identification tags consist of a metallised film surface
-20°C to 70°C
PVC Sheet
keeping the new shape once it has cooled down. Thickness: 1.5 mm.
Polyimide film with a permanent acrylic adhesive, 5 min. at 260°C designed to withstand the
B-457 Polyimide White -40°C to 260°C various processes, fluxes and cleaning solvents encountered in the manufacture of printed circuit
boards. Excellent contrast and smear resistance.
B-459 Polyester White -40°C to 100°C Matt white, permanent acrylic-based adhesive. Designed for electronic component marking and
general purpose applications requiring good solvent and heat resistance.
-196°C to 110°C Clear film that can be offered with matt white printable 3 zone in a self-laminating format.
3 cycles of 4 hours Provides excellent smudge and solvent resistance. Performs well in common laboratory
B-461 Polyester Clear in liquid nitrogen at environments such as liquid nitrogen, autoclave, freezer and hot water bath applications when
-196°C laminated around itself.
-40°C to 120°C
B-473 Polyester White 5 min. at 180°C Static dissipative acrylic adhesive. Ideal for barcode, printed circuit board and component
identification.
-70°C to 100°C
fluxes and cleaning solvents encountered in the manufacture of printed circuit boards. Excellent
B-477 Polyimide White 5 min. at 260°C Polyimide film, permanent acrylic static dissipative adhesive. Withstands the various processes,
contrast and smear resistance.
-70°C to 100°C
various processes, fluxes and cleaning solvents encountered in the manufacture of printed circuit
B-478 Polyimide White 5 min. at 260°C 1-mil low profile polyimide film with a permanent static dissipative adhesive. Withstands the
boards. Glossy topcoat provides excellent contrast and smear resistance.
1-mil low profile polyimide film with a permanent static dissipative adhesive. Withstands the
B-479 Polyimide White -70°C to 100°C various processes, fluxes and cleaning solvents encountered in the manufacture of printed circuit
boards. Matt top coat provides excellent resistance to solder balling.
B-481 Polyester White -80°C to 130°C Suitable for slide labelling and other lab identification.
B-482 Polyester White 27°C to 60°C Designed for tissue cassette identification in conjunction with the Brady BSP™31 Label
Attachment System. It has superior resistance to processing fluids.
B-483 Polyester White -40°C to 120°C General purpose labelling. Highest adhesion product for thermal transfer printing, designed for
powder coated surfaces.
B-484 Polyester White -40°C to 120°C 1 mil white polyester, ultra-aggressive adhesive. Designed for powder-coated surfaces and
curved/angled surfaces.
Matt metallised polyester with a permanent, ultra aggressive adhesive. Designed for applications
B-486 Metallised Polyester Silver -40°C to 120°C like rating and serial plates that require high adhesion to textured metals, low surface energy
plastics or powder coated surfaces.
-40°C to 100°C
B-487 Polyimide White 5 min. at 260°C Polyimide film with a permanent acrylic adhesive. Withstands the various processes, fluxes and
cleaning solvents encountered in the manufacture of printed circuit boards. Matt topcoat provides
excellent resistance to solder balling.
B-488 Polyester White -40°C to 145°C Electronic PCB and component, barcode label and rating plates. High performance matt white.
B-489 Polyester White -40°C to 120°C Matte polyester with ultra aggressive, permanent adhesive Designed for high adhesion to
textured metals, low surface energy plastics, or powder coated surfaces.
Polyester film with permanent acrylic adhesive. Can be applied to frozen surfaces including glass
B-490 Polyester White -196°C to 130°C and polypropylene stored in liquid nitrogen. Good smudge and solvent resistance. Performs well
in common laboratory environments such as liquid nitrogen and autoclave applications. For tube/
vial applications it must be wrapped upon itself.
Static dissipative adhesive UL recognised CSA accepted AGA accepted Halogen free DIN VDE 0472 part 815 RoHS compliant
For more info contact us on 1800 427 822
www.hartac.com.au
438 W: www.hartac.com.au Free call within Australia 1800 427 822 Free call within Australia 1800 427 822 W: www.hartac.com.au
438
+61 8 9373 3700
E: sales@hartac.com.au
+61 8 9373 3700
E: sales@hartac.com.au
International enquiries
International enquiries