Page 440 - Hartac Flip Catalogue 2014

Material No. Material Colour Temp. Range Properties & Applications
-70°C to 180°C
B-652 Polyimide Amber 5 min. at 280°C Polyimide film with a permanent acrylic adhesive. Withstands the various processes, fluxes and
cleaning solvents encountered in the manufacture of printed circuit boards.
Metallised polyester film with a removable silicone adhesive, designed for EPROM applications
B-673 Metallised Polyester Silver -40°C to 145°C where opacity and removability are important. UV opaque, high temperature and good chemical
and solvent resistance.
B-674 Polyester Transparent -40°C to 90°C Clear polyester film with acrylic pressure sensitive adhesive, used as a clear overlaminate.
B-702 Vinyl-Coated White -40°C to 105°C High adhesion; good conformability; low profile; resistant to oil and mild solvents. Environments
containing oil or mild solvents. Ideal for wire marking.
B-707 Polyester White -40°C to 130°C Electronic component labelling; general identification. Rough surface application; Stronger bond
to low surface energy plastics.
B-708 Vinyl White -40°C to 66°C Good strength and conformability. Resistant to oil, mild solvents and water. Indoor or outdoor
use. Excellent for cable ID.
Permanent acrylic-based adhesive. Designed for rating and serial plates using alphanumerics,
B-722 Polyester Clear -40°C to 93°C barcodes, graphic symbols and logos that require name plate quality. Withstands numerous
solvents and can be applied to variable surfaces.
B-725 Vinyl White, Yellow, Blue -18°C to 80°C This long-wearing vinyl is also used for aisle marking. Indoor use only.
Green, Red, Black
Brady B-736 is an economy pipe marker ideal for use on clean, dry pipes. Each marker has a
B-736 Plastic Film Various -40°C to 100°C diecut design which enables each label and arrow to be applied in the selected flow directions.
Up to 2 years Outdoor Life
DIy Labelmaking B-746 Type 316 stainless steel, Green, Red and -40°C to 130°C Formulated especially for laser printers. High resolution, good solvent resistance, smudge
Self-extinguishing. Meets MIL-M-87958. Applications requiring self-extinguishing, easily printed
White or Yellow
Tedlar®
B-737
-40°C to 130°C
cable or wire identification. Aerospace and military cable marking. Repositionable.
Formulated especially for laser printers. High resolution, good solvent resistance, smudge
Vinyl
-40ºC to 82ºC
White
B-745
resistance with moderate to high temperature performance.
White
Paper
-54ºC to 93ºC
resistance with moderate to high temperature performance.
Electronic PCB component, barcode labels. Excellent solvent and smudge resistance; and
B-747
Polyester
White
equipment labelling high resolution and high temperature performance.
Yellow, Blue,
A high performance tag comprised of a stainless steel panel, a polyester label, graphics
-40°C to 120°C
overlaminated printed
B-748
protection, and optional holes. It is available in various sizes. Recommended for both indoor and
outdoor use. Meets ANSI A13.1 - 1981 Scheme for the Identification of Piping Systems.
White
polyester
Permanent adhesive; smudge resistant. Economical general purpose ID. Barcode printable.
White or Yellow
B-759
-70°C to 90°C
Paper
Excellent toner adhesion.
Permanent acrylic adhesive. Designed for rating and serial plates that utilise alphanumerics,
Silver
B-773
graphic symbols and logos. Electronic component marking. Withstands numerous solvents and
Polyester
-40°C to 120°C
variable temperatures. Adheres to a variety of surfaces.
White
Recommended for applications requiring permanent wire marking or general labelling.
Nylon Cloth
B-799
-40°C to 90°C
Surface printed vinyl overlaminated with velvet embossed rigid clear vinyl. Used to mark
B-819 Vinyl w/clear vinyl Various -40°C to 70°C aisles, point out safety overlaminate equipment and exits, and enforce protective equipment
requirements. Not recommended for outdoor use.
Used for safety tags, this material is a printed paper sealed in a write on matte finish polyester
pouch with a 3/8” brass and paper grommet. The polyester laminate protects the graphics, wipes
B-837 Heavy duty polyester Various -40°C to 80°C clean, and withstands water, grease, and extreme temperatures. The write-on matte finish allows
workers to personalise tags with pen, pencil, and marker. The heavy duty construction prevents
accidental removal. Up to 2 years Outdoor Life.
B-841 2 sided polyester film White, Yellow and -40°C to 90°C A laser, inkjet and dot matrix printable polyester film. Recommended for indoor use only. If an
Orange
overlaminate is used, expected outdoor lifetime is 1-2 years.
B-842 Fiberglass reinforced Red -40°C to 120°C A fiberglass reinforced nylon device for locking out quarter turn ball valves. Material adjusts to fit
nylon
all major brand ball valves.
White, Blue, Red,
B-851 Heavy Duty polyester Yellow, Orange and -40°C to 100°C Economy Polyester Tag Accident Prevention Tags with 3/8” ID metal grommets. Used for marking
Green on-the-spot warning of dangerous conditions. 3-5 years average expected outdoor life.
B-853 Paper Cardstock Various -40°C to 90°C A surface printed cardstock tag, used for temporary tagging applications in a non harsh
environment. Not recommended for outdoor use or to chemical exposure.
B-859 Magnetic Material White, Green, Red, up to 80°C Magnetic material for pre-printed Numbers & Letters DIN A4-sized (210 x 297 mm).
Blue, Yellow, Black
B-907 Brass Natural or Black Fill -40°C to 649°C Brass Tags are used for general purpose valve identification. 5-7 years average expected outdoor
life.
B-915 Coiled Plastic Clear -40°C to 60°C Cylindrical coiled plastic sheets used for Brady Snap-On™.
B-916 Grit coated Plastic film Grey -40°C to 70°C Grit coated plastic film, used as indoor/outdoor anti-skid tape, with a permanent pressure
sensitive adhesive.
B-917 Aluminium Foil Silver -40°C to 120°C Printable; resistant to solvents, high temperatures. Identification and serialised labels, rating
plates, general labelling. Full hard aluminium.
White, Black,
B-930 Vinyl Yellow, Blue, -20°C to 80°C Flexible vinyl film with permanent pressure sensitive acrylic adhesive. Used for pictograms and
Green, Red floor marking.
B-933 Vinyl Various -40°C to 93°C QUIK-ALIGN® Numbers & Letters, Floor marking dots, arrows and footprint. 2-4 years outdoor life.
B-935 Vinyl Clear -40ºC to 80ºC Clear vinyl with a removable adhesive designed for use indoors
B-936 Vinyl Fluorescent Yellow -40ºC to 80ºC Designed for general indoor labelling.
B-946 Vinyl White or Yellow -40°C to 82°C High gloss durable vinyl film with pressure sensitive adhesive. Used for numbers & letters for
indoor use only.
B-950 Glossy Vinyl Various -10°C to 79°C Vinyl tape with protective layer of clear resistant vinyl to lock in colours. Permanent adhesive,
stands up to the toughest Indoor conditions. Indoor Use Only.
B-953 Polyester White -40°C to 155°C 1-mil low profile polyester film with an acrylic adhesive designed to identify small electrical or
electronic components. Excellent resistance to solvents. Accepts extremely small print.
B-957 Reflective Sheeting White, Yellow and -40°C to 70°C Acrylic retroreflective sheeting with pressure sensitive adhesive. Used for area marking
applications.
Striped
B-966 Polyester Clear -40°C to 155°C Release-coated surface. Not printable. Overlaminate for PERMASHIELD™ labels. Transparent and
durable.
B-969 Metallised Polyester Silver -40°C to 155°C Print-receptive topcoat. Rating or serial plate, product information, property identification,
warranty labels and inventory control labels, electronic component marking.
Static dissipative adhesive UL recognised CSA accepted AGA accepted Halogen free DIN VDE 0472 part 815 RoHS compliant
For more info contact us on 1800 427 822
www.hartac.com.au
440
440 W: www.hartac.com.au Free call within Australia 1800 427 822 Free call within Australia 1800 427 822 W: www.hartac.com.au
E: sales@hartac.com.au
+61 8 9373 3700
+61 8 9373 3700
E: sales@hartac.com.au
International enquiries
International enquiries