Page 437 - Hartac Flip Catalogue 2014

BRaDy maTERIaL SpECIfICaTIoNS

Material No. Material Colour Temp. Range Properties & Applications
B-12 Acetate Cloth Beige -40°C to 105°C Resistant to oil and heat. Wire marker for varnish dip or baking cycles.
Plastic Coated
B-88 Continuous Tape Various -40°C to 70°C Designed for use in colour coding applications. Its most common use is in pipe banding. A slight
overlap of the tape onto itself is recommended for best performance. Up to 2 years Outdoor Life
Over-laminating film with a permanent acrylic adhesive designed to adhere to printable films.
B-103 Polyester Clear -70°C to 110°C Withstands solder flux and cleaning/ degreasing solvents. Supplied self-wound for in-line over
laminating operations, or on a liner.
B-109 Polyethylene Tag White -40°C to 49°C General purpose tagging material with excellent tear and chemical resistance. Exhibits good
weatherability, humidity resistance and legibility after solvent exposure.
B-117 Vinyl White/Transparent -40°C to 70°C Self laminating wire and cable marking. Excellent abrasion and smudge resistance.
Fiberglass A reinforced polyester sign panel with protected graphics that are permanently embedded within
the sign panel, allowing for use in the most severe environments. Guaranteed not to chip, fade,
B-120 Reinforced White & Yellow -40°C to 90°C rust, shatter or peel for 15 years. After 8-10 years actual outdoor vertical exposure, background
Polyester colours will be moderately darkened or yellowed.
B-121 Paper White -70°C to 66°C Removable adhesive, smudge resistant. For inexpensive, removable applications such as
inventory or maintenance.
B-122 Paper White -40°C to 90°C Low internal strength, printable. Applications requiring a label that cannot be removed intact.
DuraGuard® property identification tags consist of a metallised film surface printed legend with
B-181 Metallised Film Various -40°C to 145°C protective tamper resistant laminate for indoor and outdoor use. 3-5 years average expected
outdoor life.
Dead soft aluminium foil with good conformability. Permanent debossing when marked.
B-184 Aluminium Foil Silver -40°C to 130°C Environments containing heat, oil or solvents, abrasive environments. Excellent for motor
vehicles and outdoor wiring.
B-292 Vinyl Colours /White / -40°C to 70°C Good conformability, durability. Self-extinguishing. Environments containing oil, water or
solvents. On-the-job marking. Excellent for machine and underground wiring. Outstanding flat
Transparent
ribbon cable marker.
B-319 Polyolefin Sleeve White -40°C to 105°C Good legend permanence and smudge resistance. Computer printable, non heat-shrinkable DIy Labelmaking
sleeve markers.
B-321 Polyolefin White -40°C to 120°C Heat-shrinkable, excellent resistance to oil and solvents. Ink-receptive coating provides
permanent legibility. Computer printable, heat shrinkable sleeve markers.
B-322 Polyolefin White or Yellow -40°C to 105°C Heat-shrinkable, self-extinguishing, permanent legibility. Self-extinguishing computer printable
sleeve markers. Aerospace & military wire marking. Meets MIL-S-85848.
B-324 BradyGlo™ Photolum -40°C to 80°C Photoluminescent self-adhesive polyester.
B-325 PVC Polyvinylchloride Yellow -40°C to 100°C Pre-Printed full circle polyvinylchloride sleeves.
B-330 Polyolefin White or Yellow -70°C to 110°C Heat-shrinkable polyolefin film with a computer printable topcoat and a heat-activating adhesive.
Identification of wire bundles, large conduits and installed cables.
B-341 Polyolefin White or Yellow -55°C to 135°C 2-to-1 shrink ratio self-extinguishing, meets the material and physical property requirements of
MIL-DTL-23053/5C (Class1) MIL-M-81531, MIL-STD-202F, method 215 and UL224.
B-342 Polyolefin White -55°C to 135°C 3-to-1 shrink ratio self-extinguishing, meets the material and physical property requirements of
MIL-DTL-23053/5C (Class1) MIL-M-81531, MIL-STD-202F, method 215 and UL224.
Irradiated polyvinylidene
B-345 fluoride heat shrink Various -55°C to 225°C Designed for wire identification and insulation purposes. Suitable for many high temperature
tubing and/or low outgassing applications.
Designed to permanently change colour (white to red) when water based solutions contact the
B-350 Polyester/Paper White -70°C to 90°C edge of the label. Withstands high heat and humidity environments without false indication
appearing. Controlling invalid warranty claims, failure analysis, design assistance or trouble
shooting.
TOUGHJET. General high-performance labels, signs, and manufacturing process identification. To
B-141 Polyester White -40°C to 100°C achieve the high solvent resistance and image quality of which Brady B-141 is capable, pigment
inkjet inks must be used.
TOUGHJET. Removable acrylic. General high-performance labels, signs, and manufacturing
B-146 Polyester White -40°C to 100°C process identification. To achieve the high solvent resistance and image quality of which Brady
B-146 is capable, pigment inkjet inks must be used.
B-351 Vinyl White -40°C to 100°C Tamper-resistant film with a permanent acrylic adhesive. Good resistance to solvents and
humidity.
B-352 Metallised Vinyl Silver -40°C to 80°C Tamper-resistant metallised film. Good resistance to solvents and humidity. Designed to fracture
easily to prevent one-piece removal.
B-355 BradyGlo™ Photolum 10ºC to 40ºC High performance photoluminescent exit signs are steel encased glow-in-the-dark plastic panels.
Intended for Indoor Use Only.
Flexible, transparent and conformable. Permanent adhesion within 24 hours. Self-laminating
B-361 Polyester White /Transparent -70°C to 105°C wire, cable and vial markers used in power plants and laboratories. Low halogen & sulphur
content.
B-389 Polypropylene White -40°C to 100°C Printable rigid inserts designed to be affixed to a wire.
B-390 Synthetic Paper White -40°C to 100°C Printable rigid inserts designed to be affixed to a wire.
B-409 Polyolefin White -40°C to 95°C Excellent write-on and laser printability. Applications requiring durable write-on barcode-
printable or computer-printable labels. Abrasion resistant.
Highly durable labels designed for thermal transfer printing tag stock in outdoor and harsh
B-412 Polypropylene Tag White -40°C to 100°C environmental applications. Ideal for wire & cable ID or product inventory ID, where legibility and
tensile strength are needed.
Gloss white film with permanent acrylic-based adhesive. Designed for rough surfaces and
B-422 Polyester White -40°C to 120°C applications where increased adhesion is required. Electronic PCB and components, barcode
labels and rating plates. Recommended for application on textured surfaces.
B-423 Polyester White -70°C to 120°C Permanent acrylic adhesive. Electronic PCB and component, barcode label and rating plates.
B-424 Paper White -40°C to 50°C Top coated. Permanent latex adhesive. Applications requiring low-cost, general purpose labelling
material.
B-425 Polypropylene White -70°C to 100°C Permanent adhesive. Applications requiring excellent solvent resistance and print permanence.
Bar code label and general labelling. Excellent abrasion and smudge resistance.

Static dissipative adhesive UL recognised CSA accepted AGA accepted Halogen free DIN VDE 0472 part 815 RoHS compliant

Free call within Australia 1800 427 822
W: www.hartac.com.au
W: www.hartac.com.au Free call within Australia 1800 427 822 For more info contact us on 1800 427 822 www.hartac.com.au 437
437
E: sales@hartac.com.au International enquiries +61 8 9373 3700 International enquiries +61 8 9373 3700 E: sales@hartac.com.au