Page 189 - Hartac Flip Catalogue 2014
P. 189
NEW BUTTERFLY VALVE BUTTERFLY VALVE LOCKOUT BUTTERFLY VALVE LOCKOUT
LOCKOUT S3920 AND S3921
S3920 S3921
• Locks out valve in seconds by feeding
the S806 cable lockout device through
desired eyelet and around valve neck.
• Durable, lightweight thermoplastic • When slid into position, the wedge on the
slider section prevents the compression
material is chemical resistant and handle from being squeezed, preventing
performs effectively in extreme operation of the valve. The holes on the
environments. slider have a staggered repeat which
• Stainless steel rivet allows device to ensures hole will be tight when placed
121504 121505 smoothly pivot open and closed to ensure against the valve. Padlock is used in the
• Effectively immobilise valves. These proper fit. hole to ensure proper lockout. Hasp can
rugged devices are ideally used to lock • Adjustable design fits the majority of be used when multiple locking is required
a butterfly valve in the OFF position by butterfly valves. with more than one lock on the lockout
clamping down on the handle at the pivot • Directional application arrows allow for device.
point so that it cannot be engaged or ease of installation and minimise user • Single universal size designed to lock
moved. error. all kinds of butterfly valves. Resistant to
• Available in two sizes, this device will • Compact design allows device to be cracking and abrasion. Highly resistant to Lockout Tagout
accommodate small (3.2 to 63.5mm) applied in tight applications. solvent and other chemical products.
and large (50.8 to 102mm) valve handle • Available with or without 4mm x 900mm • Made of strong polypropylene plastic.
thicknesses. cable. Non-conductive.
PN Description PN Description PN Description
121504 Small Butterfly Valve Lockout to suit 3.2mm S3920 Valve Butterfly Lockout without cable BS04R Universal Butterfly Valve Lockout
to 63.5mm Valve Handle Thickness
S3921
Valve Butterfly Lockout with 900mm cable
121505 Large Butterfly Valve Lockout to suit
50.8mm to 102mm Valve Handle Thickness
pNEumaTIC LoCkouT
PNEUMATIC LOCKOUT (BOX TYPE) PNEUMATIC LOCKOUTS
LP110 LP550
Hole Sizes (mm dia.)
• Isolate pneumatic energy without the expense and inconvenience • This unique design pneumatic lockout fits virtually all pneumatic
of installing in-line lockout valves. These box type pneumatic fittings used in manufacturing facilities. The pneumatic lockout is
lockouts are applied to the male fittings, isolating equipment from applied to the fitting to prevent it from being reconnected to the
all compressed air sources. pressurized air source.
• Accommodates male air hose connectors as well as their electrical • Made from the stainless steel solid sheets - to make them strong,
plugs (110V, 220V, 550V Plugs). durable and resistant to corrosion.
• 4 padlocks can be applied. • Simple to use, just place over male fittings between the two parts
• Ensures that the male air hose connectors & the plug can’t be used and put your lockout padlock.
until the lock is removed. Available in 2 sizes.
• Can also be used as plug lockout, refer “Plug Lockout (Box Type)” on
page 191.
PN Description Dimensions (W x H x D) PN Description
LP110 Small Pneumatic Lockout (Single Point) 85 x 50 x 50mm P200 Pneumatic Lockout
LP550 Large Pneumatic Lockout (Multiple Points) 160 x 90 x 95mm
W: www.hartac.com.au Free call within Australia 1800 427 822 Free call within Australia 1800 427 822 W: www.hartac.com.au 189
E: sales@hartac.com.au International enquiries +61 8 9373 3700 International enquiries +61 8 9373 3700 E: sales@hartac.com.au